What do you need to know before installing swimming pool tiles?

Yes Yes Brick Considered to be one of Best Swimming Pool Paintand this is no accident. Strong, durable, available in a wide range of colours, effects and patterns, and easy to maintain: it appeals to many pool owners, who consider it an aesthetically pleasing and practical solution.

However, its installation is a little more complicated and demanding than that of a liner. What types of tiles can you choose for your swimming pool? What are the key steps for a successful installation? Our answers.

What type of tiles should I use for my swimming pool?

Different types of tiles are suitable for making swimming pool coverings.

• Terracotta Brick It is made from a mixture of clay and silica. Due to its low porosity, it is particularly recommended for use in environments wet.
• Travertine tiles It is striking for its natural texture and pores on its surface. This limestone comes in white, beige, golden and brown colors.
• Bali Stone Tiles Its green-blue color is reminiscent of a tropical lagoon.
• Glass tiles It is often used to create mosaic coverings for Turkish baths. Its small tiles allow you to create a variety of artistic patterns.

What materials and tools are needed?

To lay the tiles for your swimming pool, equip yourself with this equipment.

Material

• coating seal
• Waterproof mortar
• Swimming pool tiles
• Swimming pool tile special glue
• Mortar is used for joint Pool Specials
• Braces

tool

• Glue Comb
• The Bat of Valere
• Rubber scraper
• rubber hammer
• grinder
• Mason’s Law
• Spirit level
• sponge wet

READ ALSOHow to detect swimming pool leaks?

Install swimming pool tiles in 4 steps

to the opposite liner If waterproof, the tiles must be laid on a pre-waterproofed support.

Prepare to support

Start by applying a sealant to fill in any irregularities in the support. Then proceed with installing the waterproofing mortar and allow it to dry within the manufacturer’s recommended time.

glued

Use a comb to apply glue to one of the pool walls. It’s best to start with the wall so you don’t have to walk over areas that are already tiled. If the tile size is larger than 1 square meter, you’ll need to apply glue on both the tile and the wall.

Laying tiles

Start installation using the wall edge as a reference point. Tap gently with a mallet to ensure the tile sticks. Use a mason’s ruler and level to check alignment. Insert rungs to mark joints. Use a tile stick to level the tile. Use a grinder to make cuts. Follow the manufacturer’s instructions for drying time.

mutual benefit

Remove the braces. Once you have your joint mortar ready, divide it into small piles and use a squeegee to distribute it in the spaces between each tile. Wipe off any excess with a damp sponge before it hardens.